Announcement
Collapse
No announcement yet.
Search Result
Collapse
97 results in 0.0060 seconds.
Keywords
Members
Tags
-
From Granger's website: "This MV is based on Ken Fisher’s Type II, with the LarMar refinement (2.2M Ohm safety resistors). It is also the most...
Leave a comment:
-
PPIMV mod on SF Princeton has issue
A friend has an old SF Princeton that's been heavily modded, including added reverb. Great sounding and LOUD little amp, but he wanted a master volume. ...
-
Watts tube audio - eyelet boards
Hey - Has anyone ordered from Watts tube audio lately? I need an eyelet board for an 18 Watt Lite build and have used several of Ken's boards in the past....
-
Hi Chuck - I was snooping around the web some more and found some folks that were dealing with the 5f2a (Hoffman's site). There I found what you called a...
Leave a comment:
-
OK. I tacked a 22uf cap across each of the two 16's and also one across the first 10uf (screen). That seemed to reduce the hum somewhat. It still seems louder...Last edited by rockybottom16; 01-27-2019, 03:22 PM.
Leave a comment:
-
mozz - I'm not sure if it's 60 or 120hz. Yes, 2 to 2 and 7 to 7, but I'm not sure why that is important since this is not a push pull arrangement.
...
Leave a comment:
-
5F2A with 2 - 6V6's - HUMMM
I just finished an experiment of sorts - a 5F2A running 2 - 6V6's in parallel. The amp sounds wonderful, but it has a pretty significant hum. Most of the...Last edited by rockybottom16; 01-27-2019, 12:21 AM.
-
3 year old 5E3 Build blowing fuses intantly
This is probably a silly question, but I need some feedback before I spend the money. I have a 3 year old 5E3 build with a Weber 02513 PT that has started...
-
Just to clarify, are you guys talking about putting a 1M resistor on pin 7 of V2? (I know this is a very old thread, but I just came across it!) Thanks...
Leave a comment:
-
Power Surge: Power Transformer damage?
A friend was using an amp I built and the venue had some electrical problems that took out every amp fuse on the stage. Being told that the wiring problem...
-
PPIMV Squeal on 36 watt Lite build (Marshall style) - Curious.
I have a 36 watt lite build (similar to an 18 watt lite, but with 4 - EL84's) with a PPI master volume. I notice that if I dime the volume control when no...Last edited by rockybottom16; 04-01-2017, 04:35 PM.
-
5E3 with Reverb Question
First let me say that if it were up to me, I'd just use a pedal. However, this friend is dead set on adding on-board reverb to his 5E3. I've found a schematic...
-
Guess what guys.... the new transformer from Weber came today. I threw it in there and problem solved! Thanks to all of you who offered insight and suggestions,...Last edited by rockybottom16; 12-28-2016, 12:29 AM.
Leave a comment:
Leave a comment: