Two things to watch.
1. When winding, as you put more winds on do not wind against the bobbin. Stop just shy of the bobbin each time to go across the...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
194 results in 0.0155 seconds.
Keywords
Members
Tags
-
There are several companies that can provide custom made covers. Expect a tooling fee and a minimum order requirement. There are two companies that I have...
Leave a comment:
-
Considering how much space the magnets take up compared to a standard pickup, I would first surmise that it is not the standard 42 gauge. If it was 43 gauge...
Leave a comment:
-
-
A damp paper towel or cloth is all you need. Don't over think it.... Water+towel=done..
Leave a comment:
-
Laser cutter! if you have one.. There are precut kits. ja-honeybee.com/shop/list.php?ca_id=2050...
Leave a comment:
-
The base is like a strats, there aren't slots in the bottom but a long rectangle which is the dims of the blades plus magnet....
Leave a comment:
-
I dealt with Joong Angn metal for years. They were always great to work with and their parts are great. SY Suk is who I dealt with mostly.
h...
Leave a comment:
-
I have a bunch of baseplates, 50mm, nickel silver, short legs. Covers too! I am not making pickups any longer and would like to sell off what I have. Will...
Leave a comment:
-
Chuck in a cordless drill, then with a bench grind running spin the drill, opposite direction of bench grinding wheel works best. Harbor Freight bench grinder,...
- Likes 2
Leave a comment:
-
Chucking reamer, preferably one with a pointed tip. Works great. I did it for years. You may to step the sizes up to what you want. One or two steps should...
Leave a comment:
-
-
I was inspired to get my PWM winder out. I made this several years ago and wound many many pickups on it. It uses a dedicated DC power supply mounted in the...
Leave a comment:
-
Hi Starry,
The digital multi meter needs to be in series to properly read the load. It looks like it's in parallel. I would trust the DC power...
Leave a comment:
-
Ok, I've sent the PM again. Hopefully it doesn't get wiped out.
Leave a comment:
-
Hey the site crashed right after I replied to your PM. Please check...
Leave a comment:
-
I think I have what you need. How many do you need? I got these from Guitar Jones several years ago. There are just under 200. I would be happy to sell them...
Leave a comment:
-
Can you provide a pic so we can be sure what version you have and or if they are stock? The situation you describe sounds to me like either the coil ground...
Leave a comment:
-
You can create a bobbin from cardstock. Cut and glue to desired dimensions. Glue it around the magnet. you can even put spacer material to keep it a little...
Leave a comment:
-
-
Leave a comment: