Announcement
Collapse
No announcement yet.
Search Result
Collapse
44 results in 0.0101 seconds.
Keywords
Members
Tags
-
Okay...figured it out. It comes straight up, however I had to loosen up the top corner pieces which were in the way.
- Likes 2
-
Markbass CMD 121p -- how to remove the chassis?
Title says it. I have one in and after removing the four hex head bolts... I can't figure out how to get the chassis out.
It presents that it needs...
-
Not at the moment, though I expect it back. I've contacted Behringer and we'll see if they cough up the schematic or not.
Leave a comment:
-
Behringer BVT-5500H
I know, hold your nose. I have one of these where the internal transformer fuses keep popping. I bumped then up from 300mA to 500mA, but I don't know what...
-
Thank you. I searched and did not find it here...doing something wrong clearly.
Leave a comment:
-
First off, it's a completely different printed circuit board. It's got a nasty hum problem and a) I'm not in a big hurry, b) I'd like to look at it with...
Leave a comment:
-
Vox Night Train 15 NT15C1
This is an eight knob version with (digital?) reverb, an effects loop, and three switches. The iron date codes are from 2014. The package is a combo with...
-
Ime, they float upwards in resistance. In a Fender, a 2K cathode reading on a 1K5 is fine. I do like replacing plate resistors with RN65...but only up...
Leave a comment:
-
Assuming mostly carbon comp resistors, what did you replace them with? btw, I really hate the way these were built and I agree that you're going to have...
Leave a comment:
-
Emerson EM Drive -- fyi
EM-Drive Transparent Overdrive Pedal | Emerson Custom
If you're unaware of this, it's a very simple pedal. A friend was very interested in...
-
Print out schematic for the CE-3 and CE-2. Grab a highlighter and start identifying the major signal path changes. I believe a CE-3 can be warmed up with...
Leave a comment:
-
-
Mackie 1642-VLZ Pro schematics
I found a site that has the top level of the service manual which probably came on a CD. It looks like they didn't do the links right, so the schematics...
-
Reason Amps Bambino....very nice btw...k, not exactly vintage, but interesting.
Leave a comment:
-
You can fine tune the secondary supply by using Schottky diodes instead of regular ones.
Leave a comment:
-
-
Can you measure the output power of both the owner's VT-40 and subject VT-22?
Leave a comment:
-
Most go directly to EMC, Heyboer, or Mercury Magnetics for teardown blueprinting. (I assume you're going to want a number of them over time.)
Leave a comment:
-
No offense, R.G, but so?
No one is going to do this in a production amp. It's a one-off approach to avoid buying a new PT with appropriate...
Leave a comment:
-
mouser carries a selection of 50W zeners in normal and reverse polarity (so you can bolt it to the chassis). 1N3305 through 1N3350. 1N3305RB is cathode...
Leave a comment:
-
Think of it more as protection for the idiot who doesn't understand an unloaded tube amp is a problem. With 250 to 500 ohms on the output jack, there's...
Leave a comment:
Leave a comment: