Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.2234 seconds.
Keywords
Members
Tags
-
Maybe you're not following parts of the conversation that haven't been explicitly fleshed out with schematics. Maybe the problem is that you jumped to a...
-
so I'd be looking at playing Cherokee about 30 times to get ~7500 winds for a single strat pickup? and do that 3 times to make 3 pickups?
...
Leave a comment:
-
Thanks for those measurement specs! That's pure gold!
In retrospect maybe I should have photographed and measured those 2017 Texas Specials...
Leave a comment:
-
I think that the problem with your guitar was due to a CNC programming error when they designed that body; they made the shelf width match the outside of...
Leave a comment:
-
I'm not a big fan of high output pickups. But then I'm not a big fan of overdrive stomboxes either. I find myself moving away from the cascaded gain preamps...Last edited by bob p; 05-19-2018, 10:00 AM.
Leave a comment:
-
Yeah, I know about pushing down on the pole pieces. It's a calculated risk. Did you do it with American Fender pickups, Mexican Fender pickups, or something...Last edited by bob p; 05-19-2018, 12:46 AM.
Leave a comment:
-
Dstrat, I'm interested that you have the same problem with "flat" pickups. As far as I can tell at this point, there are 3 main contributors to...
Leave a comment:
-
Thanks for the offer, Mozz. I may have to go that route. I was thinking that unless I'm able to find a reasonable off-the-shelf option then I may just have...
Leave a comment:
-
-
> Prolly better musician than mechanic....
true. otherwise he would have had to have been a damned fine mechanic.
I'm going...
Leave a comment:
-
"Vintage" Strat Pickups for Compound Radius Necks?
I'm interested in hearing peoples' success/failure experiences about fitting single coil strat-type pickups to a partscaster with a compound radius neck....
-
-
for my video I linked to Columbus at first, but it was audio only, so I switched the video to one that actually showed George using the Cman socket. the...Last edited by bob p; 05-18-2018, 10:39 AM.
Leave a comment:
-
if all you have is a resistor then everything looks like a nail, if you know what i mean.
Leave a comment:
-
Not a problem. I can't remember the last time I played slide while dressed like Jimmy Buffett.
The Lowell Lore says that he used an 11/16...
Leave a comment:
-
I don't get your idea of drift. That I personally wire them up to a DC source and refer to them as offsetters (or elevators, but never alligators) is separate...
Leave a comment:
-
In honor of Lowell George, I'll use a Craftsman deep socket.
...Last edited by bob p; 05-18-2018, 02:37 AM.
Leave a comment:
-
I don't know if grounding the resistors is "most common" or "traditional." If that's the most common method then I'd expect that there...
Leave a comment:
-
Indeed. First Album, before they sang about Elevators and Dudes that look like Ladies.
...
Leave a comment:
-
Dammit Leo!
Until now I had been successful at keeping the idea of a kit Junior out of my head. I really can't accommodate another guitar,...
Leave a comment:
Leave a comment: