Announcement
Collapse
No announcement yet.
Search Result
Collapse
64 results in 0.0055 seconds.
Keywords
Members
Tags
-
76jimmy, any idea as to what was causing the cut outs? I have one coming in with similar issues. "Turned into a transistor radio, then just got...Last edited by MstrB; 03-17-2023, 06:45 PM.
-
well, the thermal fuse blew. No sign of overheating tho. Will replace it and the power tubes.
Leave a comment:
-
I have the same amp with a similar problem. Was wondering if there was any more information on Bernie's repair. Any idea as to the cause of the failure? ...
Leave a comment:
-
PV classic lead ch
[QUOTE=Jared Purdy;203720]Haha! You got that right. This is my forth amp since December 2009. First one was a Peavey...
Leave a comment:
-
-
Thank you, this is a different animal. Even has tube send and recovery for the reverb circuit. It came to me with no tubes or labeling for such and the...
Leave a comment:
-
Well, it came to me with no tubes and the circuit board electrolytics removed. I wanted to know, not guess as to the original specs. It has tube send and...
Leave a comment:
-
This was the reply from Laney-
"Wow that’s an early one from around 1982, unfortunately that schematic was lost when moving factories in the late...
Leave a comment:
-
Well, I think I know why Marshall does it their way. Since they copied a tweed bassman for their first amps, the switch is in the same orientation as to...
Leave a comment:
-
Of course Marshall wires theirs as on when down. But they drive on the wrong side of the road as well.......
Leave a comment:
-
Early Laney Pro-Tube 50 Reverb Pre-AOR schematic please.
Hello, I recently acquired this amp. Lane does not have a schematic on file so I thought maybe some of the senior techs here might have 1 on file. The control...
-
I could use a copy as well. It is a fairly simple amp but I want to check if it is stock. The heater supply has a center tap AND balancing resistors.
Leave a comment:
-
its crazy, 2 in a row so I stopped. Maybe a hairdryer to warm the plastic?
Leave a comment:
-
Knobs won't come off Bassman 100 combo
I am having a problem with a Fender Bassman 100 SS combo. I am trying to remove the knobs so I can remove the circuitboard so I can resolder the input jack....Last edited by MstrB; 04-14-2015, 02:56 AM.
-
Mesa Tremoverb EQ change when using reverb
I thought this had been discussed before but cannot find the thread. I recall a Tremoverb which a customer brought in with the complaint that its eq changed...
-
Acoustic G60T warbling decay
Another G60T thread! This one is having an unusual issue. As the note decays it starts a sort of vibrato. This is most noticeable on the clean ch but I...
-
-
Interesting, back in 2004-5 we were having a lot of problems with Sovtek power tubes. You would have them on the probes and their bias point would change...
Leave a comment:
-
Thanks, thats what I hoped was the case. Always better to check first tho. Didn't want to blow the outputs by being hasty.
Leave a comment:
-
Don, this bias procedure says to do it at 2ohm but the amp says 8ohm min, what am I missing here?
Leave a comment:
-
So, did any of you folks try the LED trick and how did it work?
Leave a comment:
Leave a comment: