Announcement
Collapse
No announcement yet.
Search Result
Collapse
91 results in 0.0067 seconds.
Keywords
Members
Tags
-
switching riddle
Hey I'm goiin to build these into pedals but I want to build both in one box with a switch to toggle between them. I having a hard time figuring out how to...
-
If the rangemaster is getting more volts than it needs, how come the signal is cut?
-
is that what biasing is all about?? Is the reason I'm getting too high a voltage because I got the bias wrong? The tranny came with a note saying it was tested...
Leave a comment:
-
btw, to do that input cap mod, what value caps did you use? You just switch between input caps, right? Might do it to mine if I can get it working
Leave a comment:
-
tranny's not in backwards. Just measured. There is 8.5 volts on the collector!
Leave a comment:
-
That is exaclty what I've done. Twice. I'm still waiting. The username still exists for now. But no response from address. I've received the e-mails from...
Leave a comment:
-
And yes, the + side of the battery is wired to ground.`
Also, I added an LED. Also true bypass.
Leave a comment:
-
I've tried twice to get into that forum. I send the e-mail like they want, and wait. I tried logging in a couple weeks ago to see if they activated it and...
Leave a comment:
-
Rangemaster
Has anyone built a rangemaster here? I got some 2Sb77 germanium transistors from small bear. They came with a note saying they were tested for specific resistor...
-
Success??
I rebuilt it using the schematic below. There are a few differences. But when rebuilding I noticed the pot was in backwards!! ...
Leave a comment:
-
-
Success??
I rebuilt it using the schematic below. There are a few differences. But when rebuilding I noticed the pot was in backwards!! ...Last edited by nopainkiller; 11-18-2008, 06:06 PM.
Leave a comment:
-
yes, I've reralized this. And have been looking at some fuzz face schematics That use the 2N3906 and some NPN versions too. Found alot of other things I can...
Leave a comment:
-
ah, I'vve thought of putting foam or cloth inside. But the thing is, is it's two amps. One for guitar and one for drum machine or bass. I want to preserve...
Leave a comment:
-
with a PNP design, do I have to use the RING of the inpts and outputs and the tips as grounds???? Stupid question yes i know.
Leave a comment:
-
the tranny still measures gain on my meter. And I tried one that was untouched with the same results.
I guess I will rebuild the thing form...
Leave a comment:
-
hmmm, there's something you're overlooking. If the pot isn't bad, it might be the cap. Is it the orignal that came with the guitar??
If all...Last edited by nopainkiller; 11-17-2008, 06:29 PM.
Leave a comment:
-
If this helps:
I know the drum track was recorded with a room mic in front of a wall. Drums facing the wall about 20 feet away. This was mainly...Last edited by nopainkiller; 11-17-2008, 02:38 PM.
Leave a comment:
-
there's something I'm not getting here. I turned the caps around, and grounded the positive side of the battery, and changed the negative side to the supply....Last edited by nopainkiller; 11-17-2008, 01:50 AM.
Leave a comment:
-
Oh, well I hooked up the battery and the caps backwards then. Thanks. I thought it was just misdrwan on the schematic. I thought it might take negative current...
Leave a comment:
-
Is it just me or are the caps and the battery drawn backwards in this schematic??
Leave a comment:
Leave a comment: