25 results in 0.0041 seconds.
-
Boss ME-10 240V conversion
Is there any way to convert a Boss ME-10 to run on 240V without having to use a step-down converter or replace the internal transformer? -
Glitchy Boss FRV-1 Fender Reverb
Boss FRV-1, bypass works, effect signal works. However, when the effect is on, there is also a repeating, pulsing sound continuously. The sound is similar... -
Boss DD3 Repair Mystery - Signal not passing IC
Hi everyone,
I've been working on repairing a Boss DD3 delay, here is the service manual: https://www.synthxl.com/wp-content/uploads/2018/04... -
Boss PS-2 weak effect
I got a Boss PS-2 that seems to have a weak effect signal. The bypass is fine, as the is the bypass in the mix, but the effect seems awfully soft. In the... -
Boss ME-50 not powering up
I have a Boss ME-50 that isn't powering up. I have 9V at various places, but I believe I'm missing the 3.3V line. The schematic I found online doesn't zoom... -
Is an overheating IC a dead IC? Boss DF-2 repair
Hi everyone!
I've been working on a Japanese made Boss DF-2 lately, and was hoping to get some insight from someone more experienced in electronics... -
BOSS AW-3 problem
Hello everyone!
Got this one but something is wrong with it.
When you plug something into it (guitar or bass input happens alike) light... -
Boss HM-2 Issue
I have a Boss HM-2 that powers up but doesn't pass any signal in bypass or on. I've probed the IC's and they seem to functioning properly. I traced back to... -
Boss HM-2 Issue
I have a Boss HM-2 that visually is doing everything it's supposed to. Powers up with both 9v and adapter, LED comes on, switch turns LED on and off, but... -
Rotary Encoders
Does anybody know where I can get some rotary encoders with 7, 8, and 11 positions? I have several boss multi-effect processors that use these but I can't... -
Wanted: Box for DR-55
Original preferred, but repro would be fine. Can't find one anywhere -
Boss DR-55 Problems
I have a boss DR-55 which only outputs the hats.
I have already replaced the TC4011UBP with a (socketed) CD4011BE, but that made no difference.... -
Boss TU-2 won't turn on
Hello guys,
I've got a Boss TU-2 that won't turn on. More precisely, it powers up fine (both with power supply and battery). I can also change the... -
Blown Boss DD3 - help!
So a while back at a time when I was less wise on electronics I got my hands on a Boss DD3 delay pedal, and stupidly plugged it into an incorrect power supply... -
replacement Boss DB-90 jack
I have been doing some volunteer repair work for my local high school's music department. The music director is great but finances are always tight for school... -
Boss GT6 users.
This question is for past and present Boss GT6 users.
I have a Boss GT6 that i am just playing around with.
I made a... -
BOSS RC-2 schematic needed
anyone have a link or copy of the boss rc-2 schematic? i need to troubleshoot a fried one that's been plugged into the wrong PSU.
Thanks in... -
BOSS RC-2 Fried from wrong PSU
I have been given a rc-2 which has had the wrong psu plugged in and no longer turns on, i'm hoping that it's just a fried regulator rather than the dsp or... -
BOSS GE-7 NEW
Dear friends,
Does anyone have schematic diagram or service manual of the new version of Boss GE-7 equalizer? I mean on the verison with two... -
MT-2 Metal Zone Mods
Hello all. This is my first post here.
Ok, so I wired it for true bypass and put a Millennium 2 indicator led drive circuit in, and that all...Last edited by navvid; 03-27-2011, 10:27 PM. -
BOSS DD-3(b) schematics
I am looking for DD-3b schematics, this would be the board with the surface mount parts. 3rd generation of the DD-3.
(Yeah sucks)
Does ANYONE...
