CTS Pot Replacement

[Babynsk76]

Good evening (depending on where you live),
I'm about to replace a potentiometer in a 2020 Gibson Explorer. It says "440-70035B 1948 CTS"...

[Blueboy0911]

Help me!! Does anyone know any details on these pickups? Resistance, dimensions, number of winds?

[parentheticalfact]

Howdy y'all!
Any ideas as to a good phase inverter replacement transformer for the GA-5T amplifier? Got one here with a missing transformer so I've...

[ZRGuitarPickups]

Hey there, I've got a customer with the original p90 in their Gibson Ultratone Lap Steel. They are complaining that no matter what, this thing is just too...

[ZRGuitarPickups]

Hey there,

After doing an exhausting amount of research on the art of pickup building/winding the past few months, I finally got a MojoTone...

[bobloblaws]

Hello,
I have a Gibson Skylark GA-5 here. Fortunately this schematic lines up perfectly with the specimen I have in front of me (apparently some of...

[ewd]

I've received several requests for these Rockit 8 & 10 schematics, so I figured I should probably post them here.

...

[spark]

Hi, I'm working on a vintage AG-40 Les Paul amp. On ch1 when I get to ~the 2 o'clock mark on volume with or without guitar plugged in the amp starts to motor...

[Beef Coon]

Hi,

I'm Bobby Tyson from Tyson Tone Pickups, and grateful for the opportunity to make an entry in the Showcase!

Below is a...

[verhoevenc]

Sorry if this has been addressed before but search won't search for words as short as "V2".

Does anyone know what's going on under...

[joeandthehornets]

Howdy everyone,

Me and my rhythm'n'blues band recently got our hands on something as rare as a Gibson GA-CB in great condition.
Everything...

[ewd]

Looking for assistance for a KRK (Owned by Gibson Corp) Rockit 8 powered speaker. Trying to identify the two IC's (Amplifiers?) on the Main/Power Supply PCB,...

[ewd]

Looking for a schematic for a KRK (Owned by Gibson Corp) Rockit 8 powered speaker. Trying to identify the two IC's (Amplifiers?) on the Main/Power Supply...

[Jmoog]

I was given a Gibson Skylark GA-5 about twenty years ago but have never really used it because it's tone was always a bit too bright for my tastes. I recently...

[blckmynnse8]

I’ve been trying numerous different combinations of search words but have had no luck in finding anything regarding my specific issue.

...

[bluzmannn]

I have what I believe to be is a mid 50's Gibson BR-6 (identified from information and photos on other web sites. ) I bought this used on Ebay a few years...

[guitaromatic]

Can somebody help me?? I have a flying v faded and want to cover the pickups. So i bought the correct covers, installed the first one (52mm) on to the bridge...

[hearforever]

I have a question about adding an intensity / depth control to a Gibson GA-5T type circuit. this is a similar or identical circuit to the Gibson GA-1-RT...

[ajfreschi]

I asked this in another forum too, here it is..

Need Wiring Help with LP Studio - My Les Paul Forums

This project has got me...

[jnl636]

Need to do a cap job on this 2x12 combo. What's the easiest way to remove the chassis.

[kyleveazey]

Hey guys. I'm just now starting to move out of the typical "Marshall, Vox, and Fender" stage and move on to the more expensive amps, but I don't...