I had a 73 Fender Deluxe Reverb Silverface with scratching, humming, and mostly popping noises coming from it.
I did a repair including:
...
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
Search Result
Collapse
10 results in 0.0030 seconds.
Keywords
Members
Tags
-
73 Fender Deluxe Reverb Silverface Repair
Last edited by Distractor_Beam; 05-06-2020, 10:33 AM.
-
Engl Fireball 60 crackling on warm up
Hi, I recently blew a preamp tube in the V5 preamp spot. I found out it also took out the screen grid resistor after replacing the tube and getting no output...Last edited by johnathansrowe; 06-28-2015, 06:20 PM.
-
Vox AC 30 Voltage and popping problem.
Hi guys,
Are these voltages normal for VOX AC30? I rebuilt this amp with new board and parts to original ac 30 chassis.
32V...
-
Fender Pro 185 Causing much unwanted sounds
Hello people, I need help with my guitar amp as it is causing me a headache. The amp produces a very loud pop when switching on/off or switching between channels,...
-
Popping Sound JCM900 4102
Hi Folks.
I'm getting a pop sound from my amp. The V7 LED lit up, fuse blown. I looked inside the chassis and the 1.5K that goes from pin 4...
-
Vintage amp issues
Hi
I'm pretty inexperienced when it comes to valve amps, so please bear with me on this.
I own a Custom Sound Cube 30, an all-valve...
-
Laney CD630 Mixeramp - Loud Pops & Cracks
Hi Guys...i have a Laney cd630 amp, the unit is in good condition..looks hardly used in fact..it worked fine for a couple of months, but then started to "Pop"...
-
How would you fix this popping power switch?
I just completed a 5E3-like amp*
The power switch makes an annoying pop (through the speaker) on power-off. There's no standby switch, I left...
-
5F6A woes
A few years ago, I've had my tech build me a 5F6A with Alpha pots, Sprague caps, the works, down to spec, except for a solid-state rectifier and a somewhat...
-
Fender red knob twin pops when using push pull pots...
My 1988 red knob twin is popping very loudly, even when at low volume, when any of the push pull pots are switched. There is some mild crackling when I twist...