Rotary Encoders

[stevenrb718]

Does anybody know where I can get some rotary encoders with 7, 8, and 11 positions? I have several boss multi-effect processors that use these but I can't...

[Edd Shred]

Hi folks, please i need your help about wiring this Deathbucker to a CTS push pull 250K. A "luthier" wired It improperly because it's causing a...

[neverlost64]

I broke the master volume on a hartke HA2500 and I need the replace the pot.

I presume I can't just buy any old potentiometer and solder it...

[dchang0]

I've just tracked down a rustling noise in my brand new build with a brand new pot to one of the legs being loose (not firmly connected to the carbon trace)....

[Plectrum]

Hi!

I'm having a problem just testing a few old coils to see which is good for a dummy.

I'm also winding an antenna coil....

[BWClara]

Hi all,

I'm posting this thread from Japan.
At first,sorry about bad English.

I just got an old Marshall Reverb12 amp,but...

[josesrv]

Hi everybody. There is a rule to use 250k ohms volume pots on stratocaster pickups (from 5.5k ohms until 7.5k ohms resistance values), and to use 500k ohms...

[Landon]

Hey Everyone,

Thanks for checking in on my post. So basically, I had a broken solder joint on my amp's first input. I decided to take care...

[seventh_burn]

ok i have NO idea whatsoever as to how to read an amp's schematics sheet (wiring diagram or call it what you may...to me its the damn paged whriten in antient...

[motzu]

Hello, I've built a Tube Amp Doctor 5F1 kit and I'm pretty happy with it's tone, but recently I've added a 25uF/25V bypass capacitor for the 1K5 preamp resistor,...

[rosssurf]

I recently put seth bridge in my PRS Mccarty and I reall like the difference between that and the "59 i had in there previously. However i do play at...

[*Levi*]

Hello all! I have a cheap Squier Strat that I picked up for my kid. Here's what's going on: guitar is working fine except that the bottom tone knob is not...

[HarryLime]

Hi,

I have a Peavey bandit 112 which after a period of time at rehearsal will start to cut out. The sound cuts in and out at varying rates...

[black_box]

Hi, I am new here but I was wondering if you could help me, I have a problem with my peavey bandit 112 transtube (produced around 1994)

This...