Announcement
Collapse
No announcement yet.
Search Result
Collapse
28 results in 0.0023 seconds.
Keywords
Members
Tags
-
Fender Bassman Ten - very low volume.
A customer brought me a fender bassman ten from the late 70s. The complaint was hum after it warmed up. When I opened it up, it had all original components....
-
Marshall JCM 800 cab wiring, paired with Montgomery-Ward
Hi there,
I've just rewired my 4x12 cab to become two 2x12s to accommodate for a new (old) Montgomery Ward head. One pair of speakers is playing...
-
How to build and increase output of P90?
So I wound my first set of P90s using the AllParts P90 kit. I used 42 AWG wire and got 10,000 winds on each. When I set them up they sound good but are...
-
Problem with Fender Deluxe 65 vibrato channel volume
Ive been poking around but couldn't find any threads with this specific problem. On channel two, with the volume knob on 1-2, the output volume is only a...
-
Need Help: Gibson GA-5T Skylark Crestline: low volume, modulated distortion & more
Hi, everyone. I’m looking for some help debugging this amp and you guys were so helpful last time, I thought I'd bug you again. I’m using this project...
-
Peavey bandit 112 volume concern
Hello!
I am the owner of a Peavey Transtube Bandit 112, it is one of the older models that has the red binding on parts of the frame. Recently...
-
Valvestate 8200 volume fade
Hi guys! Newbie in here. I have a wicked problem with my old Valvestate.
The volume started to fade years back after playing for a few minutes....
-
Anecdote about "loudness" vs. power
So I had a guy who asked me to mod his JCM900 2500 to more-or-less JCM800 2204 specs. He also specifically asked me to put in Mercury transformers and a choke,...
-
Issues w/Jerry Garcia Tiger Tribute Guitar, Kustom '36 Coupe Amp
A few weeks ago, after six months of waiting, my custom-made Tiger tribute finally arrived. From the onset, things were slightly amiss: the unity gain buffer...
-
Valve amps at low volumes
Hi I’m looking for some advice on valve amps suitable for bedroom practice. In an ideal world I want an amp that can produce lovely saturated tube tones at...
-
Need repair help please!
I have a line 6 spider valve 112.
The Master Volume knob wiggles just a tiny bit and whenever
i try to turn it, it makes a crackling...
-
Peavey Classic 30 volume fades out.
So my classic 30 will fade out after about 10 minutes or so from turning it on. I have disassembled it and don't really see anything out of the ordinary,...
-
Sovtek MIG-50 pots not working properly
I'm new to this forum and this seemed like a good place for advice. I have a Sovtek MIG-50, the non-master volume model, and while I was playing it today,...
-
Max volume too low on tweed twin
Just built a tweed twin this week. After installing everything into the cab i turned it on and it was quiet. Too quiet. If I turn the volume up to max (12)...
-
Correct volume pot value for strat and HB pickups
Hi everybody. There is a rule to use 250k ohms volume pots on stratocaster pickups (from 5.5k ohms until 7.5k ohms resistance values), and to use 500k ohms...
-
5F1 hums, quiets down when volume at maximum
Hello, I've built a Tube Amp Doctor 5F1 kit and I'm pretty happy with it's tone, but recently I've added a 25uF/25V bypass capacitor for the 1K5 preamp resistor,...
-
blues junior volume is low then cuts in loud at 7
I was hoping someone might have experience with this volume problem.
Its a 2007 or so stock blues junior. The volume control is low with little...
-
Model T reissue breakup
Hey all. I just recently got a model t reissue and i was wondering what the typical volume levels are for clean channel breakup. When I hit anything above...
-
Tube amp attenuator
Ok so me and my friend built a 100-watt tube amp !! with these specs
7x12AX7, 4x6L6, 2x5U4GB
4-channels with independent EQ...
-
fender 212r vol control
I have this fender, like the amp, only problem is a overly touchy vol control. After 2 it has very little adjustment. It seems to get quite loud very quickly....