I recently acquired an old solid state Yamaha G100 212 mark ii and I had a few questions about the grounding of the amp that I...
19 results in 0.0050 seconds.
-
Grounding Yamaha g100 212
Howdy y'all,
I recently acquired an old solid state Yamaha G100 212 mark ii and I had a few questions about the grounding of the amp that I... -
Yamaha psr -f50 schematic needed
yamaha psr-f50 service manuall needed
please help.. have full dead keyboard 2 set. -
Yamaha DSC-20M Schematic
Anybody have the schematic for the Yamaha DSC-20M chorus pedal? Pedal works under battery, but plugging adapter in kills all life; D2 diode also does not... -
Yamaha G100 212 I schematic
While I was searching this schematic and found this scanned page on google images
https://music-electronics-forum.com/...ment.php?attac... -
Yamaha G100 amp knobs
Greetings,
I got a 'fix it and it's yours' Yamaha G100 212 amp recently. A few of the pot shafts had broken off, which is why I got it free.
... -
REQ: Yamaha p/n VU859100 cross reference
I was given a Yamaha EMX66m with the power switch removed. The service manual has the part number as VU859100 for the switch and VU859000 for the button.... -
Yamaha G-100 secondary fuse
Hey all!! I was given a Yamaha G-100 amp that I am desperate to get going. Here's the skinny: Previous owner was carrying out after a shore over his shoulder... -
Yamaha YST-SW200 active subwoofer doesn't forward filtered signal on the left side
Hi Guys,
I bought my Yamaha YST-SW200 subwoofer and my Onkyo R-30 receiver/amp back in 1995 at Circuit City when it was still around and until... -
Yamaha EMX512SC mixer-amp SMPS query
Can anyone please help me with a query on versions of the EMX512SC SMPS? While repairing one of these (H variant, for UK) I was baffled by some voltage readings... -
Yamaha EMX5000-12 powered mixer Faders not Working
I have a Yamaha EMX5000-12 powered mixer and basically nothing works on it but the 2 AUX faders, no other faders or knobs are responding for each channel.... -
Yamaha EMX 5000 -12 Powered Mixer - Cuts out and back in during performance
My Yamaha EMX 5000 -12 Powered Mixer was just worked on but did not fix the problem . A friend who also has the same board suggested to the tech to resolder... -
Yamaha P-60
Does anyone have this piano service manual or schematic?
Thanks in advance. -
Channel of Yamaha PA dead... Or so I think.
Hello, I'm new to these forums, as well as to the field of music electronics. Recently the channel B on my Yamaha p2100 has died. I say this because the if... -
yamaha em150 p.a. mixer
Hi all
myYAMAHA EM 150 P.A. MIXER has a problem
everything functions as it should except Left Channel Monitor Output
is dead
I... -
Yamaha P4500 / P3200 Power Amp | Distortion
I'm working on a Yamaha P4500 power amp here with distortion on 'Channel B' and I'm trying to track down the source. There is no DC on the speaker outs....Last edited by Sloan; 12-05-2010, 12:32 AM. -
Yamaha G50-112II or DG80 112 or Flextone III?
Edit: I realized this is in the wrong forum after posting it. I can't find a delete-post button, or a way to move it to a better place, so if one of the admins... -
Yamaha emx 640 schematic
A transistor BC706 overburned in the circuit and burned a few resistors and I cant see the colors of the rings to read the value of the resistors.
... -
Single cabel volum pedal (for keyboard)
Probably the most of you know that the most of the keyboards has one input for volume pedal. I have one old guitar volume with input and output. I want to... -
Yamaha EMX 5014 Schematics?
Does anybody know where I can get schematics for powered mixer Yamaha EMX 5014?
I have asked Yamaha support. There was no answer..
Thanks!
