Thinking I could figure a new pedal out in the dark...I did figure out how to get some smoke out of it. Apparently reversing AF input and output on a Digitech Bass Synth Wah will burn 1 or 2 inductors into little crispies. Digitech hasn't released prints on this pedal, and the burned spot on the board is further complicating the issue. Can't tell which, or both, of L1 and L5 looks like "L5") should be mounted and in which configuration. I suspect this may be a region that is common to other Digitech X stompboxes, if anybody has prints and/or photos of them. Any suggestions?