Tweet
I have looked all over and asked in more than a couple forums and I can't seem to locate a schematic for my Randall Pro Tube 2000. I picked it up on Craigslist for 100$ and it sounds great, albeit sporadically. It has had MAJOR work done on it before I got it, and judging by the looks of it not great quality work. many components were replaced by cutting the leads in half, then soldering new parts to the old leads so whoever did this didn't have to take out the PCB. I have no idea what has been done to it (I would guess maybe half the amp is stock), and I don't know what the power ratings need to be, or if the components in use now are up to spec.
Also I have found very little information on this amp. It seems it was only made in a head form (100 watts) but mine is fitted very cleanly in a Randall 1x12 cabinet with a 90 watt Mesa Boogie Black Shadow. Again, I have no idea what it was originally, I've email Randall with no luck.
Also I have found very little information on this amp. It seems it was only made in a head form (100 watts) but mine is fitted very cleanly in a Randall 1x12 cabinet with a 90 watt Mesa Boogie Black Shadow. Again, I have no idea what it was originally, I've email Randall with no luck.