This KB100 has low volume and bad distortion when using any of the three input channels.
If I plug a signal into the "Power Amp Input" on the back, the amp sounds normal with good power and no distortion.
I would conclude the issue is in the pre-amp section but not sure where to proceed to root-cause the issue.
As always, thank you for helping me to learn! Mark
If I plug a signal into the "Power Amp Input" on the back, the amp sounds normal with good power and no distortion.
I would conclude the issue is in the pre-amp section but not sure where to proceed to root-cause the issue.
As always, thank you for helping me to learn! Mark
Comment