Announcement

Collapse
No announcement yet.

mackie 24.8

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mackie 24.8

    Anyone have a schematic for mackie 24.8 mixer main master board?

  • #2
    Here ya go...
    Attached Files

    Comment


    • #3
      Thanks Mark. Will help alot tracing down missing R channel output. R channel works fine in sub group to main and mix b to main, but dies with just L/R pushed in. This has been a big problem for these mixers.

      Comment


      • #4
        Behringer MX8000

        Originally posted by Mark Black View Post
        Here ya go...
        Hi Marc,
        I know it's been a while, but i had to service my MX8000 just today ... thanks alot !!
        I can't find the Behringer schem's anywhere, but the Mackie are electroncally 99% the same.
        I know i know ... it's a Behringer ... but hey, it's good enough for rehearsal and for the price i payed (used), it was a bargain !!

        My problem is the flickering of all the green signal leds, only when we play at high volume (due to bad contacts in flat cables & vibrations i guess). but it's not audible ... yet.
        Usually we just give it a punch and it goes away for 10 minutes (russian repair style).
        But since there's a led broken in my SUB5 VU-meter, i just wanted to fix it all, now that it's completely disassembled.

        Can you post the input board too, would shure help alot ??
        Thx in advance !!
        Last edited by Stoffie1974; 12-29-2009, 07:51 AM.

        Comment

        Working...
        X