Announcement

Collapse
No announcement yet.

line 6 flextoneII hd head problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • line 6 flextoneII hd head problem

    i just got this head i love it but the volume drops to low and then back to full roar. any ideas like i said i love this amp and want it proper any help is appreciated............ i have a f-ton of shows comming upso i am low on time and even lower on knowledge thanks fellas happy holidays

  • #2
    Line 6

    You could try to run a plug in & out of the Eff Out & Eff Return jacks, with the amp off.
    This may clear out any crud.
    Other than that, these amps can be a real PITA.
    There is way too much digital crap in the signal chain.
    I would take it to a competent tech.

    Comment


    • #3
      thank you

      hey thanks would a can of that canned air work just blowin out the 1/4s and the circuits and such?

      Comment


      • #4
        1/4" plug

        Use them Both.

        Comment


        • #5
          look for some contact cleaner (withlube, if possible). don't spray it the jack, spray the plug. then insert and remove several times, with a slight twisting action.
          especially the return jack.

          Comment

          Working...
          X