Alright, so I'm wiring a bass up with Delano pickups (bridge- humbucker with coil tap and active passive switch, neck- single coil with active/passive switch) and after all the wiring was finished I tested it on my benchtop computer speakers and it works great. 4pdt switch changes bridge from humbucker to single coil, push/pull volume changes from active to passive, good signal levels on all settings. The problem is that when I plugged it into my amp there was nothing- no sound, no hum, nothing. Does anybody have ideas? I have drawn out a schematic if need be. Please give me some help......
** * *