Announcement

Collapse
No announcement yet.

Kustom 745PA schematics wanted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kustom 745PA schematics wanted

    Kustom 745PA schematics wanted anyone have a link to a good download site for these

  • #2
    This one should work for all Wide Panel K200 heads.

    The PA models have reverb only on one channel.
    Attached Files

    Comment


    • #3
      Thanks Bill,

      The first channel had some oddity going on with it. I recapped the entire amp now it runs much better. but the first channel has a higher noise floor then the 2nd channel for some reason. I swapped out all the SE4002 transistors for 2N4401A's on the first channel to see if it would make any difference. it didn't so I will swap the SE4002 back in and keep trouble shooting. Once it warms up it starts to crackle and make loud white noise sounds so something is still not right.
      Last edited by zero cool; 04-08-2010, 05:12 AM.

      Comment

      Working...
      X