Announcement

Collapse
No announcement yet.

Vox Pathfinder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vox Pathfinder

    Okay, here's the deal:

    I'm looking to gut out my Vox PF15r and replace the innards with a tube amp circuit that I'm gonna build. As for the circuit, I was thinking one from an AC15. What I'm asking here is if anybody knows where I could find some good circuits for the AC15 (I've found a couple, but they're blurry). Also, would you guys suggest a different circuit that might work better? I'm trying to keep all my amp controls just about the same (including the boost button, hopefully). I took a couple years of electronics in High School, but I'm unclear on how it applies to amp circuits and such. Any help would be much appreciated.

    Thanks, Robert

  • #2
    An 18 watt Marshall clone or a 20 watt Marshall clone are most always decent amps. I built one that is sort of a combination of a Vox and Marshall. Check out 18 watt.com. There are a lot of variations there in the galleries. But be aware that they get really pissy if you talk about anything but 18watt Marshalls on the board

    Comment

    Working...
    X