Announcement

Collapse
No announcement yet.

Pickup Selection and Series/Parallel with Two DP3T Slide Switches

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pickup Selection and Series/Parallel with Two DP3T Slide Switches

    Hello,

    My guitar currently has two P90 pickups with one slide switch to turn each pickup off and on. Can anyone help with a wiring design that will select pickups and switch from series to parallel? I have had a go (picture below) but I am worried about the dead end wires and if there will be some crazy feedback if the middle position is selected on Switch 1 and the Series mode is selected on Switch 2.

    Click image for larger version

Name:	P90Wiring.jpg
Views:	1
Size:	40.2 KB
ID:	862643

  • #2
    Hi, looks like you need this (from DGB Studio for Guitar Players &amp Builders)

    HTH
    Attached Files

    Comment

    Working...
    X