Results 1 to 2 of 2

Thread: Eastern Amplifier Model G1A w/6V6, 6LS7, 6X5 w/schematic, need ideas for tonestack

  1. #1
    Junior Member
    Join Date
    Aug 2008
    Location
    Bowling Green, Virginia
    Posts
    20
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Rep Power
    0

    Eastern Amplifier Model G1A w/6V6, 6LS7, 6X5 w/schematic, need ideas for tonestack

    I picked up this Eastern Amplifier, which I believe has a lot of potential. I recapped her and put a grounded 3 prong cord, and she sounds good; however, the preamp tonestack circuit is really noisy and strange to me. Appreciate any ideas for a rewire. Removing the 6LS7, eliminates the noise by the way, and it's a good NOS National Tube. Attaching a schematic I was able to pickup off internet. Thanks for your ideas!

    On the front of the chassis the amp says:

    Eastern Amplifier
    Licensed under U.S. Patents of American Telephone and Telegraph Company and Western Electric Company incorporated (see label inside).

    Model G1A
    Serial NO: 6597

    I noted an error or two on the schematic, the tone pot is wired to pin 5 of the 6V6 versus pin 3. I attempted to rewire like the schematic and the noise was at least 5 times worse, so I'm pretty sure this was just a schematic error. Also, the amp had a 1KoHm resistor to gound, I changed it to a 270oHm and that reduced the noise as well. I still plan to replace some resistors that had drifted upwards a bit but not too badly. The preamp section on this baby's got to go, appreciate advice.

    SIG
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Eastern Amplifier G1A.jpg 
Views:	196 
Size:	334.8 KB 
ID:	16510  

    0 Not allowed! Not allowed!

  2. #2
    Old Timer soundguruman's Avatar
    Join Date
    Jul 2011
    Location
    California
    Posts
    2,522
    Thumbs Up/Down
    Received: 6/0
    Given: 0/0
    Rep Power
    11
    behold the tone stack calculator
    Download
    I have used it, and it is cool. Design your own tone stack and run it in real time simulation.

    0 Not allowed! Not allowed!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Single ended 2 x 6V6 in parallel schematic ideas?
    By tubeswell in forum Theory & Design
    Replies: 19
    Last Post: 01-18-2017, 04:06 PM
  2. Schematic for Univox U 155 R amplifier
    By Gitarman in forum Schematic Requests
    Replies: 1
    Last Post: 11-10-2011, 02:14 AM
  3. ALAMO model 256P PARAGON BAND amplifier
    By tboy in forum Schematic Requests
    Replies: 0
    Last Post: 06-28-2011, 09:48 AM
  4. 1940 Operadio military theatre Model 830-A amplifier conversion - Opinions?
    By Beyond Blues Driven in forum Conversion Projects
    Replies: 3
    Last Post: 01-08-2011, 11:56 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •