Announcement

Collapse
No announcement yet.

RCF ART315A Protect mode

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Anyone still on this thread? I have an issue with the ART312A MK2 and would like to discuss.

    Comment


    • #47
      Firstly, welcome to the place!
      As this is an old thread, you'd be better served to start a new one describing your specific problem with the unit. You will get more help.
      "I took a photo of my ohm meter... It didn't help." Enzo 8/20/22

      Comment


      • #48
        Originally posted by The Dude View Post
        Firstly, welcome to the place!
        As this is an old thread, you'd be better served to start a new one describing your specific problem with the unit. You will get more help.
        Good idea!
        Rick

        Comment


        • #49
          Hello, maybe someone of you have full schematic of RCF ART315A?

          Comment


          • #50
            Hello, maybe someone of you have full schematic of RCF ART315 MKIII?

            Comment


            • #51
              Hey,

              I've got an ART325A, It had a blown LF driver when i got it.

              I'm getting signal out of the HF, but the LF has just a low buzz that is consistent, volume and input don't have no effect.

              Board looks clean, any ideas?

              Thanks,
              Tom

              Comment


              • #52
                Did you replace the LF driver?
                You should start a new thread because each amplifier can be different and if you have the schematics either link or add to your thread.

                thanks,
                Jason
                soldering stuff that's broken, breaking stuff that works, Yeah!

                Comment

                Working...
                X