Announcement

Collapse
No announcement yet.

Crate (Loud Technologies Inc) V100H Power Supply (SMPS) Fault - Tearing out hair!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    For all the crap we went through, it remains that the most likely cause of the failure was a power tube failing.
    Education is what you're left with after you have forgotten what you have learned.

    Comment


    • #17
      Your little capacitor probably was the root of the problem. After repairing cheap TVs for years, I first suspect the small electrolytics near the heat sinks of the switchers as the culrpits in a no start or unstable operation in a SMPS. They should be replaced with 105 C replacements.
      Resoldering is a great way to distract yourself from hair pulling. Cracks in the solder start from the surface of the board and work their way up. By the time you can see a crack in one joint, You can figure that all the joints are suspect. A complete resolder will add stability to any board over 5 or 6 years old. Make sure to inspect your work with a magnifier before you power it up.
      Now that you've conquered SMPS, here is a B&O digital ICE module....Genz Benz Shennandoah. Good thing I have lots of hair

      Comment

      Working...
      X