Announcement

Collapse
No announcement yet.

Silvertone 1484 Twin Twelve - Channel EFX Questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Silvertone 1484 Twin Twelve - Channel EFX Questions

    Hey guys,
    It's been a while since my last amp repair/restore, but lady luck of tubes, has smiled at last. I lucked into a Silvertone 1484 Twin Twelve Head & Cabinet. All original. Had low volme and hum. I found a few bad resistors and re=capped the amp. Also replaced all diodes. It sounds good now. One question: The tremolo and reverb only works on channel 2. Is channel one supposed to be dry? Is this normal? I've taken lots of picks of the rebuild that I'll post later this week.

  • #2
    Perfectly normal. A bazillion Fender models are that way for example.

    Here is your amp
    http://www.webphix.com/schematic%20h...ertone1484.pdf
    Education is what you're left with after you have forgotten what you have learned.

    Comment


    • #3
      Thanks Enzo. I thought so. I had someone else refer to the Fender's. Thanks You for your time and knowledge. Peace.

      Comment

      Working...
      X