I keep getting trouble with these amps!
going back to the MKII;
we talked about the varistor and adjusting the voltage across R25
now I see that pin 4 from the power tubes goes no where and the 4.7 K is not there at all.
shouldn't pin 4 be hooked up???
WTF?
both tubes are jumped at pin 4
it just goes to a bus bar and ends
going back to the MKII;
we talked about the varistor and adjusting the voltage across R25
now I see that pin 4 from the power tubes goes no where and the 4.7 K is not there at all.
shouldn't pin 4 be hooked up???
WTF?
both tubes are jumped at pin 4
it just goes to a bus bar and ends
Comment