Announcement

Collapse
No announcement yet.

Stripped threads on a SC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stripped threads on a SC

    Whats the best fix for stripped threads in the forbon? (The holes for the mounting screws) I was going to use a little epoxy but thought I'd ask first.

    Thanks

  • #2
    I don't have much experiace with this, but a few years ago I fixed the stripped holes with ebony dust and superglue. I filled the hole and redrilled and it worked fine.

    Comment


    • #3
      If nobody is going to see it, fill the hole with ALSI12
      and retap the thread when it's set. It can be drilled and tapped after 10 minutes.

      http://www.parasolinc.com/Products.asp?ProductID=ALSI12
      sigpic Dyed in the wool

      Comment


      • #4
        Thanks again.

        Peace

        Comment

        Working...
        X