Wharfedale pro 12. Inch active

[allanlaw1]

I need the schematics for my wharfedale pro Titan 12 inch active speakers.

[mozwell]

these may help, even if they are not "exactly" for your titan 12.....

[allanlaw1]

Thanks friend but the guy needs the specific one , cheers

[mozwell]

manufacturers often use the same electronics in various models, or at least the same circuit board. They may have a different number of power output devices if the amp has more output watts & maybe the amp uses a different transformer with different secondary volts.... so you may very well be able to use the information from the titan 15 service manual, as a close guide to your titan 12 model. A quick check of the titan 12 pcb will tell you if you can use the titan 15 manual as a guide.

Also check out this thread found with a simple search.... http://music-electronics-forum.com/t28462/ titan 15 schematics are the same

[Steve L]

More Titan Manuals

Here are some.

Wharfdale Pro Titan-12D Active Speaker Service Manual.pdf
Wharfdale Pro Titan-12 Active Speaker Service Manual.pdf

Steve

[Pietroruta]

Titan 8 active MKII

Hi Steve. My name is Peter.
Nice to meet you.
I saw that you have attached the service manual of the titan 12 active.
I ask your help in that you are in possession of these documents.
I have a problem with titan 8 active.
After a short circuit the power supply pcb is black. I replaced all components, zener diodes and top261yn, But Under the pcb there are resistors R6-12-15-16-19 and capacitor C11. I would like to replace these components, but I can't read values.
You have the service manual of the titan 8 active?
Can you tell me the values of these components?
Thanks in advance
Ruta pietro

[Steve L]

Ruta,

These are the values I can see in the Titan 12 active schematic. I do not have a schematic of the Titan 8. Hopefully it is the same power supply.

R6 - 10 ohm
R12 - 47 ohm
R15 - 100K (this resistor should not have been affected by what happened)
R16 - 0 ohm (jumper)
R19 - 6.8 ohm
C11 - 100nf

Steve

[Pietroruta]

In R16 I have a resistor. I don't have a jumper.
It can be a small resistor?
How can I get service manual titan 8 active MKII?