Results 1 to 3 of 3

Thread: Sunn Beta Lead Blown Resistor

  1. #1
    New Member
    Join Date
    Oct 2013
    Posts
    1
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Rep Power
    0

    Sunn Beta Lead Blown Resistor

    My Beta Lead fried the resistor between the speaker output and master preamp output. It's on the ground of both jacks and I'm not even sure why its there or why it would spontaniously combust. I can't find what type of resistor it is on the schematics, hoping someone can shed some light on the subject.

    0 Not allowed! Not allowed!

  2. #2
    Supporting Member loudthud's Avatar
    Join Date
    May 2006
    Location
    Near Dallas Texas
    Posts
    3,564
    Thumbs Up/Down
    Received: 255/0
    Given: 128/1
    Rep Power
    18
    The resistor is 10 ohms 5% 1/2W carbon film. I'm not finding it on any of the schematics I have.

    The speaker jacks are insulated from the chassis, the ground return for the speaker jacks goes via a black wire to the power amp PCB. The effects loop jacks are conneccted to the chassis at the back panel and the resistor is connected between one of the effects loop jacks and the ground side of the speaker jacks.

    0 Not allowed! Not allowed!
    WARNING! Musical Instrument amplifiers contain lethal voltages and can retain them even when unplugged. Refer service to qualified personnel.
    REMEMBER: Everybody knows that smokin' ain't allowed in school !

  3. #3
    Member gearhead63's Avatar
    Join Date
    Oct 2012
    Location
    Dallas, texas
    Posts
    54
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Rep Power
    8
    I know this is an old post, but just so you know, that resistor is a dissipation limiting overload resistor. Keeps from frying the op transistors if there is an overload or short circuit in the out put to speaker circuit.

    0 Not allowed! Not allowed!
    1937 Gibson L50 "Black Special"
    Peavey Heritage VTX, Backstage 50,
    Behringer GMX 1200H w/ Crate 4x12" cab:
    (2-Marshall "Gold Back" 100 Watt & 2-Celestion G12H-100 In Stereo)
    Crate GX1200H 120 Watt Head
    Custom Built 1x12" Guitar Cab (G12T-75)
    Behringer Ultrabass BXR1800H w/ Scorpion 15" and Peavey 410TX Cab

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Sunn Beta Lead Restoration
    By antoniobsr in forum Maintenance, Troubleshooting & Repair
    Replies: 20
    Last Post: 06-11-2013, 02:10 PM
  2. Sunn Beta Lead
    By andyjazz in forum Maintenance, Troubleshooting & Repair
    Replies: 14
    Last Post: 07-28-2011, 11:57 PM
  3. How to bias a sunn beta lead???
    By Bernardduur in forum SUNN
    Replies: 4
    Last Post: 11-20-2010, 09:12 PM
  4. Sunn Beta Lead blown?
    By Perique in forum Maintenance, Troubleshooting & Repair
    Replies: 1
    Last Post: 09-30-2008, 09:49 AM
  5. help with sunn beta lead
    By seadflo in forum SUNN
    Replies: 7
    Last Post: 07-05-2008, 12:45 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •