Announcement

Collapse
No announcement yet.

Ampeg SVT-7pro power shutdown

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Khefer Kaos View Post
    Hi! I have a SVT7 pro on my workbench with problems with the U2 IC (ICE2A165).
    I replace this with the bigger one (2A265) but still with no power. The only way what I can put the chip to work, Is when I disconect all they wires connectors of the preamp board. I first think the problem was in the preamp section, but I connect external supply and there is no problem. Any suggestions?
    In the other hand, I used an 8 pins base to place the U2, is that correct? The part behind the chip was carbonized in some points and I remove this charcoal...
    New poster with new problem -> start a new thread.
    Experience is something you get, just after you really needed it.

    Comment

    Working...
    X