Announcement

Collapse
No announcement yet.

Tensioner, gauge, and manual traverser

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    You can see a set of cam on the wall (5:13m)

    Comment


    • #17
      While this is OK for yarn, I'd worry that this would damage magnet wire. There were some postings on just this issue.

      Comment


      • #18
        Yeah, I tried a series of polished steel posts in a zig-zag arrangement and every coil I wound had internal shorts because the posts were wearing the enamel off the wire. Dumb idea.

        Comment


        • #19
          I know it may damage the wire but Tom has made his pickups this way for more than 15 years always using yarm tensioners.

          Comment


          • #20
            video to demo this, and parts list please!

            Comment

            Working...
            X