Announcement

Collapse
No announcement yet.

KRK V8 Studio Monitor Repair!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    OK, +/-15V supplies are OK. I got 7.5mV on U2 pin1 and 2.6mV on pin7. the rest of the opamps are below 2mV dc on pins 1 & 7...

    Comment


    • #17
      I hate to say it but you've got a tough dog here with this repair.
      Ok. Next step: are the feedback resistors on Lm3886's good and are the trax linking these intact?

      Comment


      • #18
        Yeah, already check those. Im getting crazy with this sh.. the only reason can be the 3886 isnt it? what doesnt fit in my head is that i have the same problem before with the original 3886s.

        got the two boards on the bench, the good one and the broken one. measuring resistance betwen V+ and Output (3886) i get 50Meg on the good one and 4Meg on the broken one. Intresting... but how the ff.. i get 40 VDC on the outputs????? any ideas??

        Comment


        • #19
          Got to be lm3886's

          Comment


          • #20
            Two of your 3886s are in parallel, so if one is bad.

            Comment

            Working...
            X