Announcement

Collapse
No announcement yet.

dearmond silver foil pickup help for rescue!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dearmond silver foil pickup help for rescue!

    Click image for larger version

Name:	WIN_20140927_183502.JPG
Views:	2
Size:	127.1 KB
ID:	868894
    Click image for larger version

Name:	WIN_20140927_183505.JPG
Views:	2
Size:	124.8 KB
ID:	868895
    Click image for larger version

Name:	WIN_20140927_183514.JPG
Views:	2
Size:	137.7 KB
ID:	868896
    Hi, I need help on this dearmond silver foil pup.
    I messed it up by cutting the wire too short and am now trying to put new shielded cable on the lead and ground.
    It still has the wax over the winding. I can't find the hot lead. I read that it is soldered to the base plates little notch, but I can't find it.
    It has the original tape next to the notch but nothing under it.
    I'm afraid of cutting the wax potting off and hacking up the winding.
    So what is the best way of getting to the lead wire? Grounding is the opposite corner right?
    I am not concerned with using vintage wire etc. I just want to get this working again.
    Thanks.
Working...
X