Hi
My name is Marc and I am from Holland/the Netherlands and this is my first post after finding this awesome forum.
In the beginning of this year I picked up my old electronics hobby again and started buying stuff I could repair in order to sell it (as working) again (with a slight profit).
I have bought a non-working Behringer DDX3216 digital mixer and trying to get it to work again. I have already found several interesting threads here.
The one I got starts up with the full screen logo and then stops. The guy I bought it from said he replaced one of the Flash ROM ICs (IC15) with one from a working unit and that fixed the problem. In my ignorance I bought a new chip but after further examining the machine (having a schematic does help greatly) I concluded I may just have to rewrite the firmware. I have tried to connect over MIDI but the firmware load program (I got from the Behringer site) does not pickup the connected DDX3216.
There is also an RS232 port that can be used and my question is: will that work better (guaranteed)? Any tips on reflashing the firmware on one of these?
(problem is I don't have a rs232 cable but will get one if I know this has a chance of working
).
Thanx,
Marc
My name is Marc and I am from Holland/the Netherlands and this is my first post after finding this awesome forum.
In the beginning of this year I picked up my old electronics hobby again and started buying stuff I could repair in order to sell it (as working) again (with a slight profit).
I have bought a non-working Behringer DDX3216 digital mixer and trying to get it to work again. I have already found several interesting threads here.
The one I got starts up with the full screen logo and then stops. The guy I bought it from said he replaced one of the Flash ROM ICs (IC15) with one from a working unit and that fixed the problem. In my ignorance I bought a new chip but after further examining the machine (having a schematic does help greatly) I concluded I may just have to rewrite the firmware. I have tried to connect over MIDI but the firmware load program (I got from the Behringer site) does not pickup the connected DDX3216.
There is also an RS232 port that can be used and my question is: will that work better (guaranteed)? Any tips on reflashing the firmware on one of these?
(problem is I don't have a rs232 cable but will get one if I know this has a chance of working
![Big Grin](https://music-electronics-forum.com/core/images/smilies/biggrin.png)
Thanx,
Marc
Comment