Announcement

Collapse
No announcement yet.

Pickup Rewinds

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    If it's a Fender it originally had a BP.
    You can even see the extra length of wire that was once soldered to the plate.

    Comment


    • #47
      All I have is some steel, no copper coated steel baseplates.
      Probably not what was on it.
      They will probably sell it loose in the guitar shop.
      I was planning on a rewind, put the steel base plate, and yellow and black clothe wire.
      It appears to be South up, wound CCW/Top Going.
      I usually wind my Tele sets, neck CW/S-U black & White, and Bridge CCW/N-U Yellow and Black.
      T
      "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
      Terry

      Comment


      • #48
        Fender bass vi rewind

        as mentioned in the other thread I am about to rewind some fender bass VI pickups. they appear to be similar to jag pickups.

        they are from a squire bass , however do look to be quite authentically created, using forbon and alnico magnets

        anyway here are some pics of the pickup assembled and disassembled

        also dimensions and other electrical parameters scanned from my notebook

        Click image for larger version

Name:	DSC06717.JPG
Views:	1
Size:	127.8 KB
ID:	840075Click image for larger version

Name:	DSC06717.JPG
Views:	1
Size:	127.8 KB
ID:	840075Click image for larger version

Name:	DSC06717.JPG
Views:	1
Size:	127.8 KB
ID:	840075Click image for larger version

Name:	DSC06718.JPG
Views:	1
Size:	124.0 KB
ID:	840076Click image for larger version

Name:	DSC06719.JPG
Views:	1
Size:	139.7 KB
ID:	840077Click image for larger version

Name:	DSC06720.JPG
Views:	1
Size:	140.6 KB
ID:	840078Click image for larger version

Name:	DSC06721.JPG
Views:	1
Size:	141.1 KB
ID:	840079Click image for larger version

Name:	DSC06723.JPG
Views:	1
Size:	136.2 KB
ID:	840080
        Attached Files

        Comment


        • #49
          one more page which I Click image for larger version

Name:	p4.jpg
Views:	1
Size:	516.8 KB
ID:	840084could not add in the previous post

          Comment


          • #50
            Originally posted by mr fab View Post
            as mentioned in the other thread I am about to rewind some fender bass VI pickups. they appear to be similar to jag pickups.

            they are from a squire bass , however do look to be quite authentically created, using forbon and alnico magnets

            anyway here are some pics of the pickup assembled and disassembled

            also dimensions and other electrical parameters scanned from my notebook
            Thanks for all the info.
            It all being in metric, it doesn't mean much to a lot of us.
            I was going to make a layout, but never did figure out what the core dimensions were?
            If it is is a jaguar pickup, I guess that is close enough.
            T
            "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
            Terry

            Comment


            • #51
              Originally posted by big_teee View Post
              Picked up a Strat Single coil pickup today at a local guitar store to rewind.
              The owner said he thought it was an old Di-marz pickup.
              It has a bobbin, with allen screws, a Keeper bar on the bottom with dual ceramic magnets on the bottom.
              The magnets are head to head like a P90 pickup.
              N/keeper/N.
              I searched the Di-marz site and saw nothing like it.
              Does anyone know what the DCR was for this pickup.
              It look aged like it could be 70s maybe?
              Kind of has a Super distortion Single Coil look to it.
              I may go back with 43SP.
              Here are some pictures of it.
              The Di-Marzi SDS pickup is way overwound with 42SPN.
              Overwound to the point that it was falling off the bobbin.
              Probably 11,000-11500 turns of wire on the bobbin.
              That was probably its demise.
              I've not had good life from pickups wound dangerously full.
              Bobbin dimensions.
              L=2.275"
              W=.248"
              H=.502"
              Flange=.610"
              I'm going to wind it with 10,000 turns of 42SP.
              That should make it around 8k ohms dcr.
              T
              "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
              Terry

              Comment


              • #52
                Originally posted by big_teee View Post
                I'm going to wind it with 10,000 turns of 42SP.
                That should make it around 8k ohms dcr.
                T
                Just a FYI. Those SDS1 pickups were originally meant for the bridge position with a DCR reading of 9.0-9.3k

                Comment


                • #53
                  D advertises 8.68k.
                  http://music-electronics-forum.com/a...uick_guide.pdf
                  10,000 turns will have to do.
                  If there is a lot of room left after 10k turns, I may put on some more.
                  I use to fill them up too much, I don't do that anymore.
                  T
                  Attached Files
                  "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
                  Terry

                  Comment


                  • #54
                    Also on the SDS-1, It was wound North up, CCW.
                    To match the customers other strat type pickups, I will make it CW South up.
                    T
                    "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
                    Terry

                    Comment


                    • #55
                      That is a beuatiful coil, I almost can't believe it's handwound!

                      Comment


                      • #56
                        Originally posted by elipsey View Post
                        That is a beuatiful coil, I almost can't believe it's handwound!
                        Please be specific, the Thread is full of them.
                        I'm fixing to wind this SDS bobbin, you will probably not be able to say that about it!
                        T
                        "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
                        Terry

                        Comment


                        • #57
                          Oops, I meant to reply to kayakerca, but I know you are also an artist, T!

                          Comment


                          • #58
                            Here's the Dimarzzi SDS-1.
                            I could only get about 9700 turns on it.
                            My wire that I used is a little large(but sounds great), .00272".
                            It measured about 7.3k in the cool shop.
                            So mine may be the MDS-2. (Medium Distortion Single, 2nd Generation)
                            I'll pot it tomorrow, and do some more Taping, glue the magnets, and call it good.
                            T
                            Attached Files
                            Last edited by big_teee; 11-14-2015, 04:24 PM.
                            "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
                            Terry

                            Comment


                            • #59
                              Originally posted by elipsey View Post
                              Oops, I meant to reply to kayakerca, but I know you are also an artist, T!
                              Lol. . . If I hand guide a wind, I promise I'll disclose that fact. I'm 100% mechanic, 0% artist. ��
                              Last edited by kayakerca; 11-14-2015, 02:43 PM.
                              Take Care,

                              Jim. . .
                              VA3DEF
                              ____________________________________________________
                              In the immortal words of Dr. Johnny Fever, “When everyone is out to get you, paranoid is just good thinking.”

                              Comment


                              • #60
                                Had a dead '67 Tele bridge in for a a rewind. Rust on both end pole pieces in the core area and on pole piece tops as well, but cleaned up nice. Double lacquered the bobbin to try and hold the the flared ends from getting any more so. Taped the core as well for a little more protection (T's flower wrapping tape). Wound it to 8.2kΩ with 42PE. Adjusted the width of the wind on the core every couple thousand turns to try and comfortably deal with the flaring on the ends and still have a reasonable looking coil shape at the end of the day. Only used about 16g. of dead draw tension to try and minimize the level of flaring the wind tension might generate. We'll have to see how things turned out with the rewind in another 48 years.

                                Customer looking to get to Nocaster output (from what I can find could be anywhere from upper 7kΩ region all the way to 10kΩ zone). Didn't really want to risk adding anymore wire because of the flaring potential. It looks overly "shiny" from the finished photo, but that's really the light angle.
                                When you hold it in your hand to look it over, it still has a nice looking vintage patina but without the rust.

                                Click image for larger version

Name:	67 Tele - rust.jpg
Views:	1
Size:	127.2 KB
ID:	840176Click image for larger version

Name:	67 tele - cleaned.jpg
Views:	1
Size:	146.6 KB
ID:	840177Click image for larger version

Name:	67 tele - rewound.jpg
Views:	1
Size:	144.1 KB
ID:	840178

                                The only important test will be the tonal characteristics once it's back in the Tele.
                                Take Care,

                                Jim. . .
                                VA3DEF
                                ____________________________________________________
                                In the immortal words of Dr. Johnny Fever, “When everyone is out to get you, paranoid is just good thinking.”

                                Comment

                                Working...
                                X