Switch for Dunlop Phase 90

[tubetonez]

Anyone know a source for the board mount footswitch in the Dunlop reissue Phase 90? Alternatively, could I fit a standard footswitch with jumpers to the board?

[Mark Hammer]

Try Small Bear electronics (www.smallbearelec.com). He usually carries a lot of the parts used for Dunlop/MXR pedals. The component price itself may not be the absolute best around, but chances are good you'll save on the shipping.

[tubetonez]

Thanks Mark, I'd already looked at the smallbear site with no luck, I emailed him to ask. Wondering now if the small Alpha DPDT could be wired to the board with jumpers and fit.