Announcement

Collapse
No announcement yet.

Thomas Vox V1032 troubleshooting help?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • R.G., I got a red Fasel inductor, which measures about 0.64H. MRB is happy again!

    Comment


    • Good work!

      What's left?
      Amazing!! Who would ever have guessed that someone who villified the evil rich people would begin happily accepting their millions in speaking fees!

      Oh, wait! That sounds familiar, somehow.

      Comment


      • The V1031 is all done. For the V1032, I want to add LEDs to the footswitch using the +31V source, and I'd love to put a V11N1 big head distortion booster in it. I looked at trying to fit the fuzz circuit on the PCB in place of the e-tuner, I don't see how to make it all fit. I imagine I can put a mini board underneath the chassis where the e-tuner was. Also, I'm not sure what kind of switching relay to use. I assume I can use the 17V source instead of 20V as in the big heads but with a different resistor to get to the 10V the distortion booster?

        Comment

        Working...
        X