Results 1 to 8 of 8

Thread: fender scn neck pickup question re dc resistance

  1. #1
    Senior Member
    Join Date
    Jan 2009
    Posts
    593
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0

    fender scn neck pickup question re dc resistance

    Hello Chaps
    I had a customer in today with a fender SCN neck pickup reading about 12 k ohms, googling the specs said it should be about half of that. Question Are they wired in parallel? one coil looks like its damaged so it could be that only one coil is working. Any info appreciated.

    Cheers

    Andrew

    0 Not allowed! Not allowed!

  2. #2
    Senior Member jack briggs's Avatar
    Join Date
    Oct 2007
    Location
    Raleigh
    Posts
    262
    Thumbs Up/Down
    Received: 1/0
    Given: 6/0
    Quote Originally Posted by the great waldo View Post
    Hello Chaps
    I had a customer in today with a fender SCN neck pickup reading about 12 k ohms, googling the specs said it should be about half of that. Question Are they wired in parallel? one coil looks like its damaged so it could be that only one coil is working. Any info appreciated.

    Cheers

    Andrew
    it would seem to be so. they are a stacked hum-canceling design, so one coil is probably shorted or dead.

    0 Not allowed! Not allowed!

  3. #3
    Senior Member
    Join Date
    Nov 2006
    Location
    Sacramento, CA
    Posts
    503
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    The vintage noiseless are wired in series and the scn appear identical externally so I'm pretty sure the scn are wired in series as well. This leaves us no explanation for your odd reading. Did the customer only bring in the one pickup?

    0 Not allowed! Not allowed!

  4. #4
    Senior Member
    Join Date
    Jan 2009
    Posts
    593
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Hi Richard
    The customer only bought in one pickup. He had been poking around in the electronics and said that afterwards the pickup was louder when he put the pickguard back on.

    Cheers

    Andrew

    0 Not allowed! Not allowed!

  5. #5
    Old Timer
    Join Date
    Feb 2010
    Location
    Just south of Bawlmer, Merlin
    Posts
    2,570
    Thumbs Up/Down
    Received: 291/6
    Given: 270/1
    I know zilch about SCN pickups.
    But you say the pickup's DCR reads about twice normal, and the customer says it has gotten louder.
    That sure sounds like the coils are wired in parallel, and one is open.

    -rb

    0 Not allowed! Not allowed!

  6. #6
    Senior Member
    Join Date
    Nov 2006
    Location
    Sacramento, CA
    Posts
    503
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Have you checked the resitance of the individual coils?

    0 Not allowed! Not allowed!

  7. #7
    Supporting Member
    Join Date
    May 2006
    Location
    PDX
    Posts
    3,222
    Thumbs Up/Down
    Received: 6/0
    Given: 5/0
    Did just get noisy suddenly too?

    0 Not allowed! Not allowed!

  8. #8
    Senior Member
    Join Date
    Jan 2009
    Posts
    593
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Hi All

    I ended up putting a Jeff Beck noisless in which the customer supplied. Measuring with a meter one of the coils was definitely dead. I just wanted to know for reference what the coil configuration is on the scn pickups, it seems to be different for neck and middle to bridge.

    Cheers

    Andrew

    0 Not allowed! Not allowed!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DC resistance of a two string pickup
    By jnohlic in forum Beginner/ Hobbyist
    Replies: 2
    Last Post: 08-29-2016, 12:59 AM
  2. Pickup works but no dc-resistance reading
    By Tomi Kettunen in forum Pickup Makers
    Replies: 8
    Last Post: 10-26-2014, 07:59 PM
  3. Les Paul neck pickup question.
    By minimustangs in forum Pickup Makers
    Replies: 18
    Last Post: 11-26-2011, 07:15 PM
  4. What DC Resistance should a Fender twin OT measure?
    By ValveBytes in forum Maintenance, Troubleshooting & Repair
    Replies: 2
    Last Post: 12-07-2008, 10:06 AM
  5. Ignorant question about DC resistance
    By voodoochild in forum Pickup Makers
    Replies: 8
    Last Post: 12-20-2007, 05:35 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •