Announcement

Collapse
No announcement yet.

49,2 mm P-90 parts source

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 49,2 mm P-90 parts source

    Hi,

    I'm looking for a source for 49,2 mm P-90 parts source, baseplate, keeper, bobbins.

    I find only 50 mm parts. can someone help, please?

  • #2
    Originally posted by marcfrom View Post
    Hi,

    I'm looking for a source for 49,2 mm P-90 parts source, baseplate, keeper, bobbins.

    I find only 50 mm parts. can someone help, please?
    Being the P-90 born as a 50.8mm, I don't think you'll have any luck finding alternative measures.

    It's actually not that difficult to make your own bobbins. Keeper bars of that measure are found everywhere. You only need to adapt the baseplates, which is more than feasible if you have some power tools and the right bits.

    If you expected to find everything ready to assemble, then, making a Seinfeld reference, "No soup for you!"

    HTH,
    Pepe aka Lt. Kojak
    Milano, Italy

    Comment


    • #3
      Thanks for your answer LtKojak,

      Actually, I want to propose a butyrate covers, but I only find it in 49,2 mm.

      Maybe the best way should be to find a 50 mm butyrate covers. Do you know if it exist ?

      Comment


      • #4
        Originally posted by marcfrom View Post
        Thanks for your answer LtKojak,

        Actually, I want to propose a butyrate covers, but I only find it in 49,2 mm.

        Maybe the best way should be to find a 50 mm butyrate covers. Do you know if it exist ?
        Sorry, why butyrate?
        Pepe aka Lt. Kojak
        Milano, Italy

        Comment


        • #5
          Because my client ask this. The ivory color is also different than ABS.

          Butyrate 50's P90 Pickup Cover 1 15/16" (49.2mm) - Vintage Cream - Philadelphia Luthier Tools & Supplies, LLC
          Last edited by marcfrom; 06-21-2017, 04:50 PM.

          Comment


          • #6
            49.2 will possibly work with 50 mm parts- were talking the two outside poles would be off set by .38mm and the inner poles would be less so unless your pole piece screw heads are maximum diameter youll probably never notice.

            Comment


            • #7
              Hi Jason,

              I already tried my 50 mm P-90 with the 49,2 Gibson ABS covers but it does not fit in.

              I don't understand why the pickup parts manufacturers build all parts, bobbins, baseplate in 50 mm only and the butyrate covers only in 49,8 mm.
              Does someone have an idea ?

              Comment


              • #8
                Originally posted by marcfrom View Post
                I don't understand why the pickup parts manufacturers build all parts, bobbins, baseplate in 50 mm only and the butyrate covers only in 49,8 mm.
                Does someone have an idea ?
                Why can't you find a pack of hotdogs and a pack of hotdog buns with the same number in each pack?

                Why do manufacturers make metrically-dimensioned parts for U.S. designed pickups which were originally dimensioned in inches?

                Why do I have to search out pots with 6.35 mm (=.25") diameter shafts, or use 6mm shafts with some kind of bushing or spacer, so that my Fender knobs will fit without wobbling?

                -rb
                DON'T FEED THE TROLLS!

                Comment


                • #9
                  It's not comparable,

                  There's no problem to find a 6.35 mm pots and 6.35 mm knobs.

                  I mean there should be a request for a butyrate covers in 50 mm, because it's the only measurement we can find for P-90 parts.

                  I'm sure you can find a hotdog buns with the same lenght of hotdogs too.
                  Last edited by marcfrom; 06-21-2017, 08:17 PM.

                  Comment


                  • #10
                    Originally posted by marcfrom View Post
                    I mean there should be a request for a butyrate covers in 50 mm, because it's the only measurement we can find for P-90 parts.
                    No, as LtKojack has alluded, both the parts and the covers should be 50.8 mm.
                    Because the original measurement was 2".
                    And if wishes were horses, then beggars would ride.

                    -rb
                    DON'T FEED THE TROLLS!

                    Comment


                    • #11
                      P-90 Plastic Pickup Bobbin 50mm

                      Looks like Mojotone's site "PickupParts" menu isn't working... anyway, they have everything you need with the metric 50mm polepiece spread. P-90 Nickelsilver baseplates, keeper bars, bobbins and plastic covers.

                      HTH,
                      Pepe aka Lt. Kojak
                      Milano, Italy

                      Comment


                      • #12
                        Originally posted by rjb View Post
                        No, as LtKojack has alluded, both the parts and the covers should be 50.8 mm.
                        Because the original measurement was 2".
                        And if wishes were horses, then beggars would ride.

                        -rb
                        You are a philosopher

                        Comment


                        • #13
                          Originally posted by marcfrom View Post
                          You are a philosopher
                          Another MEF member once called me "charming".
                          I don't think he meant it either.

                          -rb
                          DON'T FEED THE TROLLS!

                          Comment


                          • #14
                            Originally posted by rjb View Post
                            Another MEF member once called me "charming".
                            Could be your proximity to "Charm City," sweetie...
                            This isn't the future I signed up for.

                            Comment


                            • #15
                              Originally posted by Leo_Gnardo View Post
                              Could be your proximity to "Charm City," sweetie...
                              That's "hon" to you,... sweetie.
                              "Charm City" was a passing fancy. We're back to "Mobtown" now.

                              -rb
                              DON'T FEED THE TROLLS!

                              Comment

                              Working...
                              X