Announcement

Collapse
No announcement yet.

Dimebucker INFO NEEDED

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dimebucker INFO NEEDED

    Hey everyone,

    A friend of mine was poking around his dimebucker and he managed to break one of the bobbins... I'm fixing this for him but i was wondering if anyone here knows what gauge wire this use? I'm guessing a 43 awg but maybe it's 44awg.

    Any info kindly appreciated.

    Thanks
    Jack

  • #2
    With a pickup DCR of 16.5, most likely it is 44sp wire.
    If the bobbin dimensions are similar to a Gibson Dirty Fingers?
    Probably 7000-7200 turns of 44SP, will get you close.
    GL,
    T
    "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
    Terry

    Comment


    • #3
      Duncan does a bunch of pickups in that same 16.4k range that uses 44 gauge wire ..I agree With Terry .
      "UP here in the Canada we shoot things we don't understand"

      Comment


      • #4
        Thanks for your input guys... I'll give it a go on 44awg.

        Comment

        Working...
        X