Do you think this will work for a interstage (ala gibson style) transformer? Pulled from old military gear, i have about a dozen of these. Ratio is about 1:1, i was putting 70mv on the primary and getting about 68mv on each secondary. I sweeped them on the Sys Comp and they are really flat up to about 2mhz. Some are written 1kv test voltage. Just looking ahead to the next franken-project.
Announcement
Collapse
No announcement yet.
Interstage transformer
Collapse
X
-
Only thing that bothers me is the DC resistance is about 13 ohms. Chances are the inductance is low too, will measure that tomorrow. Maybe if i use a 12au7 driver. They may have been in a RF circuit, i'm not sure what they came out of. I guess i have to build something to find out. Maybe a simple Musicmaster bass circuit would let me know if they will work.
Comment
Comment