Results 1 to 6 of 6

Thread: Source for LDR? For rebuilding trem circuits

  1. #1
    Member
    Join Date
    Mar 2010
    Posts
    234
    Thumbs Up/Down
    Received: 1/0
    Given: 5/1

    Source for LDR? For rebuilding trem circuits

    Greeting, I've had several amps with bad opto-coupler. Not sure what to buy to replace the light dependant resistor & where to get them. Rebuilding seems like the only option if it's not Fender. I appreciate any help....

    0 Not allowed! Not allowed!

  2. #2
    "Thermionic Apocalypse" -JT nickb's Avatar
    Join Date
    Dec 2009
    Location
    Devon, UK
    Posts
    3,007
    Thumbs Up/Down
    Received: 281/1
    Given: 265/1
    Assuming you are in the US try Jameco. I've bought these with great success you have to bend the leads of the LDR and hold it all together with heatshrink.

    https://www.jameco.com/webapp/wcs/st...oductId=202391

    https://www.jameco.com/webapp/wcs/st...oductId=210260

    0 Not allowed! Not allowed!
    Last edited by nickb; 12-03-2017 at 10:06 PM.
    Experience is something you get, just after you really needed it.

  3. #3
    Member
    Join Date
    Mar 2010
    Posts
    234
    Thumbs Up/Down
    Received: 1/0
    Given: 5/1
    Wow, you saved "the day" !! I'll order tonite

    0 Not allowed! Not allowed!

  4. #4
    Supporting Member
    Join Date
    Dec 2009
    Location
    UK
    Posts
    3,253
    Thumbs Up/Down
    Received: 22/0
    Given: 2/0
    I've used the same LDRs that Nick posted with no problems at all. I bought 100 for 1 a few years ago. All the mainstream electronic suppliers were getting rid of non-ROHS stock in a panic and there were some insane bargains. They never thought it through that a cadmium cell would still be listed as non-ROHS anyhow after the smoke cleared.

    0 Not allowed! Not allowed!

  5. #5
    Lifetime Member Enzo's Avatar
    Join Date
    May 2006
    Location
    Lansing, Michigan, USA
    Posts
    30,934
    Thumbs Up/Down
    Received: 887/5
    Given: 0/0
    I bought a grab bag of those photocells from Jameco a long time ago, and still have a couple. Worked fine.

    0 Not allowed! Not allowed!
    Education is what you're left with after you have forgotten what you have learned.

  6. #6
    Supporting Member Randall's Avatar
    Join Date
    Jan 2013
    Location
    Cape Coral, FL
    Posts
    1,773
    Thumbs Up/Down
    Received: 107/0
    Given: 16/0
    I just ordered 10 of each.

    0 Not allowed! Not allowed!
    It's weird, because it WAS working fine.....

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Gibson GA-20RVT trem LDR replacement
    By Randall in forum Maintenance, Troubleshooting & Repair
    Replies: 14
    Last Post: 11-21-2017, 02:28 AM
  2. Rebuilding Can Caps
    By loudthud in forum Repair and Restoration
    Replies: 6
    Last Post: 10-02-2015, 05:08 AM
  3. Source for LDR to repair Yamaha T100?
    By hasserl in forum Maintenance, Troubleshooting & Repair
    Replies: 4
    Last Post: 12-31-2011, 03:21 PM
  4. rebuilding an amp without a layout?
    By mikhett in forum Debugging Your Build
    Replies: 4
    Last Post: 02-15-2011, 03:44 AM
  5. Source for solid core trem-spaced bobbins
    By kevinT in forum Pickup Makers
    Replies: 0
    Last Post: 08-02-2008, 01:22 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •