Announcement

Collapse
No announcement yet.

Need Schematic for Crate CR-45

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need Schematic for Crate CR-45

    I've been working on an old school Crate CR-45. The signal was cutting in and out. I pulled it apart to redo a few cold solder joints and use contact cleaner to clean the pots, jacks and switches. Since I've reinstalled the preamp board back into the chassis, it now does not pass signal. Does anyone have a schematic for this amp?

  • #2
    Originally posted by goldtop5 View Post
    I've been working on an old school Crate CR-45. The signal was cutting in and out. I pulled it apart to redo a few cold solder joints and use contact cleaner to clean the pots, jacks and switches. Since I've reinstalled the preamp board back into the chassis, it now does not pass signal. Does anyone have a schematic for this amp?
    Could not find one. What tools do you have? DVM, scope audio probe?Link below for probe. will require another amplifier or an amplified speaker.
    https://www.diystompboxes.com/pedals/debug.html
    nosaj
    soldering stuff that's broken, breaking stuff that works, Yeah!

    Comment


    • #3
      Here you go: CR-45 Schematics.pdf

      Comment


      • #4
        THANKS!!!

        Comment


        • #5
          https://supportloudtech.netx.net/loud-public/#category/13002

          https://supportloudtech.netx.net/loud-public/#category/13059
          It's All Over Now

          Comment

          Working...
          X