Results 1 to 2 of 2

Thread: Fender FM212R Broken Control Shaft

  1. #1
    Supporting Member Jazz P Bass's Avatar
    Join Date
    Dec 2008
    Location
    Wernersville, PA
    Posts
    12,458
    Thumbs Up/Down
    Received: 184/2
    Given: 88/0

    Fender FM212R Broken Control Shaft

    So I get in a Fender FM212R that has a broken Treble control.
    The guy said all that he did was 'bump it with his knee' and the knob & shaft snapped off.

    A little research shows that the control is not available with the snap in legs.
    I found the non snap-in at Mouser and ordered it in.
    Got a new knob from Darren Riley.

    As I am disassembling the chassis to get the PCB out I snap off three other control shafts.
    WTF.
    Now, I have worked on a number of these amps without this issue.

    This poor guy had the same problem: http://www.mylespaul.com/threads/hel...ciated.400763/
    Click image for larger version. 

Name:	Fender Amp 212r.jpg 
Views:	19 
Size:	27.2 KB 
ID:	50999

    So I did some sleuthing and it turns out that the factory controls are a tad oversized for the knobs.
    If you push the knob down too far it really pinches the splined/ split shaft & sets it up for a fatigue failure.

    I used my heatgun to slightly soften the inside of the knobs when I reassembled the chassis to the original style controls.
    That will prevent future reoccurrence's of breakage.
    The non snap-in controls fit the knob fine.

    I wonder how many FM amps are like this?
    Or was it simply a run of oversized/ mis spec'd controls.

    3 Not allowed! Not allowed!

  2. #2
    Senior Member
    Join Date
    Jun 2006
    Location
    Norristown state hospital
    Posts
    1,926
    Thumbs Up/Down
    Received: 33/0
    Given: 0/0
    Think I posted about this years ago.
    Really cheap metal pots, the shafts snapped with just the slightest pressure removing the knobs.

    0 Not allowed! Not allowed!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Fender FM212R Squeals at 4ohms, but not 8?
    By parentheticalfact in forum Maintenance, Troubleshooting & Repair
    Replies: 3
    Last Post: 03-27-2016, 04:32 PM
  2. Fender FM212r no channel switching
    By nosaj in forum Maintenance, Troubleshooting & Repair
    Replies: 8
    Last Post: 04-22-2015, 02:21 AM
  3. Fender FM212R switching prob.
    By jbmdisco in forum Guitar Amps
    Replies: 6
    Last Post: 12-16-2014, 06:10 PM
  4. Peavey Special 212 - Broken Potentiometer Shaft, Help!
    By pigseye in forum Maintenance, Troubleshooting & Repair
    Replies: 8
    Last Post: 06-03-2011, 03:14 PM
  5. Fender FM212R Reverb Failure
    By Circadian in forum Maintenance, Troubleshooting & Repair
    Replies: 4
    Last Post: 03-10-2010, 05:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •