Announcement

Collapse
No announcement yet.

My 1987 Gorilla GG-20

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • My 1987 Gorilla GG-20

    It works great until you move the amp cord then the sound cuts out. Do I have a bad input? I’ve tightened all connections and I can’t find anything

  • #2
    Originally posted by Beu4aday View Post
    It works great until you move the amp cord then the sound cuts out. Do I have a bad input? I’ve tightened all connections and I can’t find anything
    Could be a broken solder joint on the input. Will have to open up the amp and look at the solder connections on the PCB.

    nosaj
    soldering stuff that's broken, breaking stuff that works, Yeah!

    Comment


    • #3
      Ok I didn’t see any last time I’ll look again thanks 🙏

      Comment


      • #4
        Originally posted by Beu4aday View Post
        Ok I didn’t see any last time I’ll look again thanks 🙏
        Please take good pictures and upload them please.
        Thanks,
        nosaj
        soldering stuff that's broken, breaking stuff that works, Yeah!

        Comment


        • #5
          Some bad cords can act strange.
          Before you tear into it, be sure and try a different cord.
          T
          Last edited by big_teee; 11-25-2018, 11:46 PM.
          "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
          Terry

          Comment


          • #6
            Or jack contact may be worn/dirty/twisted/weak so when moving plug it loses contact on some positions.
            With chassis open move plug to see if you can reproduce the problem.
            Last edited by J M Fahey; 11-26-2018, 04:10 AM.
            Juan Manuel Fahey

            Comment

            Working...
            X