Tweet
Does anyone have access to the schematic for this one?
The USB connector broke and shorted out and there is a burnt part on the board, I'm guessing a ferrite bead. (see pic).
If I short the missing part nothing changes, I need to know where it comes from. The Main power supply is working.
crystal oscillators are running, all sub-regulators seem to be working, but the board seems to be stuck in Standby.
No lights at all except for a short flash after ac is turned on. The green LED behind the Standby button is not on or flashing.
Thanks
https://music-electronics-forum.com/...1&d=1544474329
The USB connector broke and shorted out and there is a burnt part on the board, I'm guessing a ferrite bead. (see pic).
If I short the missing part nothing changes, I need to know where it comes from. The Main power supply is working.
crystal oscillators are running, all sub-regulators seem to be working, but the board seems to be stuck in Standby.
No lights at all except for a short flash after ac is turned on. The green LED behind the Standby button is not on or flashing.
Thanks
https://music-electronics-forum.com/...1&d=1544474329
Attached Files
Comment