Results 1 to 3 of 3

Thread: Is this a worthwhile Project....?

  1. #1
    New Member
    Join Date
    Dec 2018
    Posts
    1
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Rep Power
    0

    Is this a worthwhile Project....?

    I came across this old non working Cube type Philips radio/tape player in my garage. It has 4 speakers inside and architucture that might suit a single channel voice amplifier that I could use with my guitar. I sing a bit low and play with a pick so the guitar is quite loud drowning out my voice a bit unless I put a lot of effort in to raise the voice. I stripped everything out that is no longer needed and I am now left with the speaker installation. That is 2No at 4w x 8Ώ's and 2No at 2w x 8Ώ'. It has 240V mains and battery power to the innards amounts to 12volts.

    Should I put it in the skip or might it be a worthwhile project?

    0 Not allowed! Not allowed!

  2. #2
    Senior Member
    Join Date
    Aug 2017
    Location
    Portland, OR
    Posts
    656
    Thumbs Up/Down
    Received: 209/1
    Given: 99/2
    Rep Power
    3
    Depends how much you value your time at. Do you need something that is battery powered? I would probably get a $50 pawn shop bass or keyboard combo amp instead, if you need battery powered look for a Crate Taxi amp or something.

    0 Not allowed! Not allowed!

  3. #3
    Old Timer J M Fahey's Avatar
    Join Date
    Oct 2007
    Location
    Buenos Aires, Argentina
    Posts
    11,753
    Thumbs Up/Down
    Received: 1,878/23
    Given: 1,463/35
    Rep Power
    27
    Well, today you have a cabinet, two woofers, two tweeters, and *hopefully* a working power transformer, even better if the power supply works or you can cannibalize its main parts to build a working one.

    Perfect amplifier would be a TDA2003/LM383 based one: 10W RMS into 2 ohm load when fed from a 12V supply, you would need to build a simple microphone preamp.

    It would be suitable for a Family type "show" , from a large dining room to a smalloutdoors BBQ.

    If you think you are up to it, start searching the usualīplaces for an LM383/TDA2003 board which is *designed* to drive 2 ohm loads.

    We might then suggest a simple 1 transistor mike preamp you can build on perfboard.

    0 Not allowed! Not allowed!
    Juan Manuel Fahey

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RCA 813 Project
    By mooreamps in forum Other Amps
    Replies: 1
    Last Post: 08-17-2013, 01:51 AM
  2. First Amp Project
    By jessereitz in forum Build Your Amp
    Replies: 2
    Last Post: 12-18-2010, 05:01 PM
  3. A New Project has come along!
    By noredr2 in forum Conversion Projects
    Replies: 4
    Last Post: 06-12-2010, 03:39 AM
  4. Amp cradles... Worthwhile?
    By Cobra in forum 5 E 3
    Replies: 7
    Last Post: 09-21-2007, 07:16 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •