Announcement

Collapse
No announcement yet.

Flat Pole Strat Magnet Length

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Flat Pole Strat Magnet Length

    Haven't wound pickups in a long time and when I did a was almost exclusively humbuckers. I am piecing together a Strat for myself and am going to wind some flush pole pickups. What is that typical magnet length of most modern flat pole Strat pickups?

    The only info I could find is conflicting. Both supposedly measurements of "70s" Fender pickups:
    Seymour Duncan says .656"
    StewMac says .671"

    If anyone happens to have a flat pole Duncan lying around and can measure it, that would serve my needs.

    Thanks in advance,
    Dave
    Last edited by PoorMan; 01-10-2019, 02:11 AM.

  • #2
    This might help!
    Depending how tall you want them, and how much sticking out the top.
    https://music-electronics-forum.com/...0&d=1526741704
    "If Hitler invaded Hell, I would make at least a favourable reference of the Devil in the House of Commons." Winston Churchill
    Terry

    Comment

    Working...
    X