Announcement

Collapse
No announcement yet.

Any Kurzweil Keyboard gurus?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Any Kurzweil Keyboard gurus?

    I have a sp4-7 that fails to power on correctly. When I opened it up I found a bad lm317 regulator and 470uf cap. Replaced those then checked my voltages. 10v returned along with 5.1v but -10v is around -.7 and the 15v rail is being pulled down to 12v. Replaced the opamps thinking those were pulling down the -10v rail. No dice. Not sure where to go from here. Suggestions?
    Attached Files
    Last edited by tdlunsfo; 01-12-2019, 09:58 PM.
Working...
X