Results 1 to 7 of 7

Thread: Korg DTR-2000

  1. #1
    Twobie
    Join Date
    Jan 2019
    Posts
    4
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Rep Power
    0

    Korg DTR-2000

    Hi all,

    Hopefully someone can advise me what to do next trying to repair my Korg DTR-2000 rack tuner.
    Everything seems to look and work fine but it's not tuning...
    I allready did some trouble shooting:

    In the test mode all LED's are working fine and also all push buttons do their jobs.
    The mute, input select, Chromatic, mode, flat etc,etc push buttons are switching properly
    The sound function, to hear the notes you want to tune, is audible through the sound output.
    So far so good....

    When hooking up a test generator with 110 Hz / 150mV to input 1 or 2, I can measure the same values when measuring the output jack, even when the tuner is not powered.
    On the klm-2358 PCB I measured this signal on pin 20 (input) of IC M8303 (IC1).
    On this IC the 5 V supply is availabe on pin 57 (Vcc) and pin 19 (reset)
    All plugs, wiring, elco's and connections looks fine.

    But in Cent, Strobe and Hz position nothing is moving...

    So if there's anyone who can help me it would be very nice.

    The service manual incluing schematics:
    https://www.manualslib.com/manual/10...-Dtr-1000.html

    Regards,

    San

    0 Not allowed! Not allowed!

  2. #2
    Supporting Member Jazz P Bass's Avatar
    Join Date
    Dec 2008
    Location
    Wernersville, PA
    Posts
    12,588
    Thumbs Up/Down
    Received: 280/2
    Given: 144/0
    Rep Power
    25
    Not too sure, but do you have the full 9Vdc supply?

    The meter display is all controlled from a microcontroller.
    If you have the correct 'select' inputs and the unit is not functioning correctly, that pretty much points to the micro. (IC 1)

    I would check IC 2, reset IC for function.
    Does the output pin which goes to IC 1/ pin 9, go low briefly at start up?

    1 Not allowed! Not allowed!

  3. #3
    Twobie
    Join Date
    Jan 2019
    Posts
    4
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Rep Power
    0
    On IC2 I measure approx. 5V on pin 1(supply) and also 5V on pin 3 (output)
    As I undertand from the M51951 data sheet the output should have a 200 micro second delay to reset IC1.
    I just unpacked a new Keysight DSOX1102G oscilloscope.
    I can hook up the probe CH1 to IC2 pin 1 and probe CH2 to pin 3, I can see both voltages but I have to find out now how to capture the startup signal....

    0 Not allowed! Not allowed!

  4. #4
    Twobie
    Join Date
    Jan 2019
    Posts
    4
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Rep Power
    0
    It seems that there's not a delayed output signal on IC2.
    I'm looking for a replacement IC but it's not so easy to find a M51951AML sot-89.
    Does somebody knows where to order it? I have checked Mouser, Farnell, etc.

    0 Not allowed! Not allowed!

  5. #5
    Don't forget the joker g1's Avatar
    Join Date
    Feb 2010
    Location
    Canada, somewhere north of Fargo
    Posts
    10,863
    Thumbs Up/Down
    Received: 913/21
    Given: 2,226/8
    Rep Power
    21
    Maybe this one from wellgain electronics, but the price seems ridiculous. Have you checked with Korg?
    https://wellgainelectronics.com/volt...m51951aml.html

    0 Not allowed! Not allowed!
    Just because they don't have tubes doesn't mean they don't have feelings! - glebert

  6. #6
    Twobie
    Join Date
    Jan 2019
    Posts
    4
    Thumbs Up/Down
    Received: 0/0
    Given: 0/0
    Rep Power
    0
    Thanks g1, it is ridiculous, that's for sure, but I didn't check with Korg yet.

    0 Not allowed! Not allowed!

  7. #7
    Master Destroyer nosaj's Avatar
    Join Date
    Sep 2011
    Location
    Pace, FL
    Posts
    2,563
    Thumbs Up/Down
    Received: 650/100
    Given: 99/33
    Rep Power
    10
    Quote Originally Posted by San View Post
    It seems that there's not a delayed output signal on IC2.
    I'm looking for a replacement IC but it's not so easy to find a M51951AML sot-89.
    Does somebody knows where to order it? I have checked Mouser, Farnell, etc.
    Sometimes when you can't find what your looking for there . a phone call to customer service will help .Sometimes.

    nosaj

    0 Not allowed! Not allowed!
    Binkie McFartnuggets‏:If we really wanted to know the meaning of life we would have fed Stephen Hawking shrooms a long time ago.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. korg dtr 2000
    By talk in forum Music Electronics
    Replies: 1
    Last Post: 06-08-2012, 12:24 AM
  2. Korg SDD 2000 user manual
    By bramley in forum Schematic Requests
    Replies: 5
    Last Post: 03-11-2012, 04:13 PM
  3. Marshall DSL 2000 or TSL 2000
    By Slobrain in forum Guitar Amps
    Replies: 10
    Last Post: 09-12-2007, 07:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •